+ High-Performance, Low-Power AVR 8-bit RISC Microcontroller
+ Advanced RISC Architecture
- 120 Powerful Instructions – Most Single-clock Execution
- 32 x 8 General Purpose Working Registers
- Fully Static Operation
- Up to 20 MIPS Throughput at 20MHz
- 2K Bytes In-System Self-programmable Flash Program Memory
- 128 Bytes In-System Programmable EEPROM
- 128 Bytes of Internal SRAM
- Write/Erase Cycles: 10,000 Flash / 100,000 EEPROM
- Programming Lock for Software Security
- One 8-bit Timer/Counter with Separate Prescaler, and Compare Mode
- One 16-bit Timer/Counter with Separate Prescaler, Compare Mode, and Capture Mode
- Four PWM Channels
- On-chip Analog Comparator
- USI – Universal Serial Interface
- Programmable Serial USART
- Programmable Watchdog Timer with Separate On-Chip Oscillator
- debugWIRE On-chip Debugging
- In-System Programmable via SPI Port
- Power-On Reset and Programmable Brown-out Detection
- Internal Calibrated RC Oscillator
- External and Internal Interrupt Sources
- Low-power Idle, Power-down, and Standby Modes
- Enhanced Power-on Reset Circuit
- 18 Programmable I/O Lines
- 20-pin PDIP, 2-pin SOICl, and 20-pad QFN/MLF
- 1.8 – 5.5V (ATtiny2313V)
- 2.7 – 5.5V (ATtiny2313)
- 0 – 4MHz @ 1.8 – 5.5V; 0 – 10MHz @ 2.7 – 5.5V (ATtiny2313V)
- 0 – 10MHz @ 2.7 – 5.5V; 0 – 20MHz @ 4.5 – 5.5V (ATtiny2313)
- Active: @ 1MHz, 1.8V = 230 uA; @ 32KHz, 1.8V = 20 uA (incl. Osc)
- Power-Down Mode: < 0.1 uA @ 1.8V
Selamat belajar!
Tidak ada komentar:
Posting Komentar